650-353-5786 (4:00am – 4:00pm EST)

Alarm Sensors Kit 3 (Smoke and Heat)

For Smoke & Heat Alarm (GSM Fire Alarm) with alerts to mobile phone

5.0 (based on 2 reviews )

5.0 By from Italy

i use in my ristorante, good cheap solution that work! +++++

i use in my ristorante, good cheap solution that work! ...

5.0 By from Romania

Works fine, I have tested with cigar and isocket have called to me :)))

Works fine, I have tested with cigar and isocket have ...

Manufacturer: Joint development under iSocket Systems control

EAN: 6430038550033

Model number: ISKIT3

We now have only one iSocket. All previous models are obsolete. You can use iSocket for power and temperature monitoring. Water flood, alarm or gas monitoring are NOT available at the moment.

Choose a quantity

50% discount for any kit if you buy together with main unit or buy two sets
$44
$22
Add to cart

Alarm Sensors Kit 3 (Smoke and Heat) (ISKIT3): Overview

This set includes high quality Smoke & Heat detector and special cable (5m/16ft) for wiring - all that you need to make a simple GSM fire alarm system when use together with iSocket Smart Sockets. We prepare our sensors for easy installation. In most cases all you need to do is the final wiring and assembly providing you have a basic knowledge in that area. When used together with iSocket Smart Sockets, you will get a GSM fire alarm system at minimal cost.

You may also use this set with iSocket Smart Relays. If you use this with the iSocket Smart Relay you will need to remove the phone connector jack and wire up your own connection. Alternatively you can use your own cable, providing it is a high quality alarm grade copper cable.

Suitable for different GSM fire alarm systems. Especially tested and approved for use with iSocket devices.

Which sensor should you use – "Smoke" or "Smoke & Heat"?

Both sensors can be used for fire alarm alerts. The "Smoke & Heat" detector gives more peace of mind, since it recognizes not only smoke, but also a high temperature (>57 Celsius or 135F). However this sensor is not suitable to use in premises where the high temperature is normal. If you install the "Smoke & Heat" sensor in premises of this nature, it may send false alarms. For such conditions "Smoke" detector would be the best.

What's included

  • Smoke & Heat Detector (1pcs)
  • Cable 5m (16ft) (1pcs)
  • User Manual (1pcs)

Alarm Sensors Kit 3 (Smoke and Heat) (ISKIT3): Features

  • Top quality technologies to avoid false alarm
  • High reliability, because of the reliable wired connections that use special professional copper alarm-grade cable, 5m (16ft)
  • High security, because the connection cannot be interrupted by wireless scanners
  • Maintenance free, because you do not need to check and change batteries
  • Top quality connectors
  • Suitable for different smoke detection and fire alarm systems
  • Especially tested and approved for use with iSocket devices
  • Simple GSM fire alarm in a few minutes when use with iSocket Smart Sockets
  • SMS notifications to your mobile phone in a case of smoke detection
Write a review

Review Alarm Sensors Kit 3 (Smoke and Heat)

5.0 (based on 2 reviews)

Bottom line: 100% of respondents would recommend this to a friend.

Last reviews:

i use in my ristorante, good cheap solution that work! +++++

Products: Alarm Sensors Kit 3 (Smoke and Heat) (ISKIT3)

5.0 By from Italy

Bottom line: Yes, I would recommend this to a friend

4/10/14

Works fine, I have tested with cigar and isocket have called to me :)))

Products: Alarm Sensors Kit 3 (Smoke and Heat) (ISKIT3)

5.0 By from Romania

Bottom line: Yes, I would recommend this to a friend

3/12/13

Please wait...

Thank you for your feedback!

Wait a moment...

Wait a moment...

Wait a moment...

Wait a moment...